Description
At Eyeglass Repair USA, we offer the best lens frame repair with weld. Lens frames are made from metals. So we use laser technology for safe and clean repair. With laser weld, we can join the broken parts without damaging the metal plating or the coating. The repair will be 60 times stronger than a solder weld and nearly invisible to the naked eyes.
How do we perform lens frame repair with weld?
Step 1: Prepare the joint
In a welding project, joint preparation is the very first and important step. For high-quality weld, we will clear the frame weld area from any paint or coating. Also, clean both edges of the weld from any oils or dirt. If needed, we will grind the parts to make them flat for a tight joint.
Step 2: Add filler wire
Filler wire works as glue and joins the broken parts together. There are many filler wires available in the market but we use silver fill wire on eyeglasses frames. Silver is more compatible than other metals. We use a thinner wire (26-30 AWG) so we can add other similar metals to your frame to make the repair more precise.
Step 3: Apply argon gas flame
The last step we use is the application of argon gas flame. A laser-focused beam of argon gas applies to the joints for a good weld.
This repair applies to these breaks :
- a break in the frame around the lens (lens frame)
- a broken lens frame screw assembly
- in the elbow of arm and lens frame
- between lens frame and trim frame attached in front
- between lens frame and bridge
Some repair versions
– of thousands –
shown in the photos above.
Free Return Shipping
